EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Product Range
- »
- Foundry Chemicals And Minerals
Foundry Chemicals And Minerals
Wholesale Distributor of a wide range of products which include fire bricks for foundry, graphite crucible cup, slag remover unexpanded perlite ore, foundry red iron oxide, foundry grade bentonite and sodium bentonite powder.
Fire Bricks For Foundry
Product Price: Rs 48 / PieceGet Best Price
Product Brochure
Product Details:
| Packaging Type | Loose |
| Shape | Rectangular |
| Size | 9x 4.4 x 3,2,1 In. |
| Color | Brown |
| Usage/Application | Side Walls |
| For Use In | Side Walls, Floor, Partition Walls |
| Coverage Area | 3.5 bricks per sq.ft |
| Thickness(mm) | 25 to 75 mm |
| Thermal Expansion | 1800 dig |
| Resistance Durability | Fire and Heat |
| Country of Origin | Made in India |
High Alumina Bricks are produced with select bauxite chamotte as main raw material, fired at 1450-1470 °C by advanced process with strict quality control.
High Alumina bricks have great features like high temperature performance, great corrosion and wear resistance, high bulk density, low iron content, etc. High Alumina bricks are extensively used in mining, metallurgy, cement, and chemical, refinery and refractory industries.
These bricks are used in all kinds of industrial furnaces and high temperature areas to prolong the lives of furnaces.
Yes! I am InterestedRequest A Callback
Graphite Crucible Cup
Product Price: Rs 56 / NumberGet Best Price
Product Details:
| Capacity | 1 kg |
| Crucibles Capacity | 5 kg |
| Material | Graphite |
| Crucibles Height | 4 - 6 Inch |
| Max Temperature | 0-1000 degree Celsius |
| Max Working Temp | 1500 C |
| Shape | Round |
| Usage/Application | Foundry |
| Purity | 99.5 % |
| Color | Grey |
| Stock No. | 01 |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
Slag Remover Unexpanded Perlite Ore
Product Price: Rs 24 / KgGet Best Price
Product Brochure
Product Details:
| Packaging Size | 40 kg |
| Size | 1 - 2.5 |
| Packaging Type | Bag |
| Form | Stones |
| Brand | Turkey |
| Usage/Application | Slag Remover |
| Moisture | 1% |
| Color | Grey |
| Grade | Foundry |
• Low moisture retention
• Non-combustible
• Resistant to heat
• High insulation
• Low cost
• Low thermal conductivity
Yes! I am InterestedRequest A Callback
Foundry Red Iron Oxide
Product Price: Rs 18 / KgGet Best Price
Product Brochure
Product Details:
| Form | Powder |
| Purity | 97% |
| Packaging Type | Bag |
| Usage | Industrial |
| Grade | Industrial Grade |
| Color | Red |
| Packaging Size | 40 kg |
| Physical State | Powder |
| Brand | Foundry |
| Country of Origin | Made in India |
Red iron oxide powder is most widely distributed in nature. It is the basic mineral for steel plant. Red iron oxide has tremendous application in building, construction, paint and many other trades. In India red oxide is mined in several regions and very good quality with high percentage of iron oxide. For paint ceramic and building materials shade and tone of red oxide is important.
Yes! I am InterestedRequest A Callback
Foundry Grade Bentonite
Product Price: Rs 9,800 / TonGet Best Price
Product Brochure
Product Details:
| Type | Sodium Bentonite |
| Purity | 99.90% |
| Grade | Foundry Grade |
| Usage/Application | Foundry |
| State | Powdered |
| Grade Standard | Foundry Grade |
| Form | Powder |
| Color | Off White |
| Packaging Size | 50 kg |
| Packaging Type | Packet |
| Country of Origin | Made in India |
| Brand | Kutch |
Two types of bentonite clay are typically used: calcium bentonite and sodium bentonite.
Sodium Bentonite (also known as Western Bentonite): Western bentonite is known for its ability to absorb and hold large amounts of water and for the resulting qualities of its high swell (bigger increase in volume) and high viscosity. It is good for green sand mixtures requiring high dry strength and hot strength, such as for iron and steel casting. It is more difficult to mull and help the clay to attach to the sand grains, so more mull energy is required.
This sodium-based clay is capable of swelling approximately 15 times its dry volume. In molding sand, it helps molding maintain its dimensional accuracy
Yes! I am InterestedRequest A Callback
Sodium Bentonite Powder
Product Price: Rs 500 / BagGet Best Price
Minimum Order Quantity: 1 Bag
Product Brochure
Product Details:
| Packaging Size | 50 kg |
| Grade | Foundry Grade |
| Packaging Type | Bag |
| Material | Sodium Base |
| Brand | Kutch |
| Form | Powder |
| State | Powdered |
| Type | Foundry,Piling and Electrode |
| Place Of Origin | Kutch |
Features:
- Viscous
- High Water absorption
- Gelling in nature
- Hydration
- Brilliant swelling properties
Yes! I am InterestedRequest A Callback
Asbestos Millboard Sheet
Product Price: Rs 70 / KgGet Best Price
Product Brochure
Product Details:
| Thickness | 1.5 mm |
| Type | Insulation Board |
| Packaging Type | Wooden Crate |
| Material | Asbestos |
| Size | 1 m x 1 m |
| Color | Off White |
| We offer asbestos millboard that is fabricated from selected clean, long asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These millboards are known for its features such as heat and fire resistance and strength. Our millboards are perfect at temperatures up to 500°C (932" F) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400 C. These are also known for its features such as withstanding vibratory and impact loads easily. |
Yes! I am InterestedRequest A Callback
Foundry Core Paste
Product Price: Rs 30 / KgGet Best Price
Minimum Order Quantity: 1 Kg
Product Details:
| Physical State | Liquid |
| Packaging Size | 1 kg |
| Packaging Type | Packet |
| Shelf Life | 3 months |
| Density | 1.7 to 1.9 kg/m3 |
| Grade Standard | Technical Grade |
| Usage/Application | Industrial |
| Material | A Solvent Based Core Adhesive |
A solvent based core adhesive. It is a ready to use, rapid drying core paste. It can be used for core assemblies, core repair and mold seal whenever quick set up is needed.corepaste will air dry to an exceptionally strong bond. When exposed to air this product will air dry in about 30 minutes. Drying is dependent on evaporation and larger beads and finer sands may increase dry time required. Bond is not weakened by extended storage of glued cores. Itis not weakened by application of water or alcohol based core and mold coatings. It will not generate gas, once properly dried.
Additional Information:
- Pay Mode Terms: T/T (Bank Transfer)
Yes! I am InterestedRequest A Callback
Anti Piping Compound Apc Powder
Product Price: Rs 30 / KgGet Best Price
Minimum Order Quantity: 1 Kg
Product Details:
| Grade Standard | Foundry |
| Physical State | Powder |
| Usage | Industrial |
| Packaging Size | 50 kg / 40 kg |
| Packaging Type | Bag |
| Brand | Ola |
| Material | Anti Pipping Chemical |
| Shelf Life | 12 months |
Anti Piping Compound comprises a range of high quality exothermic and insulating powders for hot topping.
It is a powder formulation, supplied in bag form, which is used as a cover for the surface of the steel in ingot casting, to assist feeding.
Application Generally, sufficient material is added to provide at least a 25mm layer on the ingot head, the actual thickness increasing with ingot size. The application rate per ingot tonne thus varies from as low as 0.6 Kg per tonne up to 2 Kg per tonne, depending on the product type, ingot dimension and, to a lesser extent, steel quality. There is a range of APC recipes available to cater for different ingot sizes.
Application of pre-weighted bags of material is carried out simply by placing on the metal surface using a shovel, hooked tool, or by throwing. In the case of uphill-teemed ingots the recommended practice is to add the material once metal is within the feeder head. Where top-teemed ingots are concerned the anti-piping compound must be added on completion of the teeming cycle.
The function of the feeder head is to prevent lateral heat losses of the feed metal to the mould wall. In the feeding of ingots it is also necessary to prevent the excessive heat losses to the atmosphere from the radiating upper surface of the molten steel. This is achieved by application of a exothermic anti-piping compound. On completion of the exothermic reaction, APC breaks down to form an insulating layer, thus preserving the heat that is built up during the exothermic cycle.
Benefits
- Good spread ability, with fluid powder providing a cover over the exposed metal surface and requiring minimal attention after application.
- Low fume and dust evolution.
- Product consistency, as a result of quality control testing on all production batches.
- APC acts as both and exothermic and insulating ingot casting flux.
Yes! I am InterestedRequest A Callback
G 80 Flux Powder
Product Price: Rs 44 / KgGet Best Price
Product Details:
| Grade Standard | Technical Grade |
| Physical State | Powder |
| Packaging Size | 50 kg |
| Usage/Application | Furnace |
| Packaging Type | Bag |
| Material | Improves Lining Life And Prevents Slag Building In Furnace |
Yes! I am InterestedRequest A Callback
pk51 abrasive powder
Product Price: Rs 42 / KgGet Best Price
Product Details:
| Physical State | Powder |
| Packaging Size | 50 kg |
| Packaging Type | Bag |
| Weight | 50 |
| Shelf Life | 12 months |
| Melting Point | Aabone 300 dig |
| Density | 1.72 g/cc |
| Grade Standard | Technical Grade |
| Usage | Industrial |
| Material | Used In Steel Alloys, Stainless Steel Melts |
Ø Increase the life of lining and all Refractories
Ø Recovery of metal like Cr.
Ø Slag inclusion defects are reduced to great extend
Ø Can be used as a heat retainer
Ø Copper and Aluminum usage would be reduces since K51 works as an Oxidizing Agent.
Ø Usage of Slag Remover will be reduced
This K51 is used in Steel Alloys, Stainless Steel Melts and works in both Basic and Acidic linings of Induction Furnaces of any size
Yes! I am InterestedRequest A Callback