EXPLORE MORE CATEGORIES
- Home
- »
- Our Product Range
- »
- caldrys
caldrys
caldrys
Whytheat Refractory Castable
Product Price: Rs 145 / KgGet Best Price
Minimum Order Quantity: 25 Kg
Product Brochure
Product Details:
| Packaging Size | 25kg |
| Grade | 50%,60%,90% Alumina Content |
| State | Powdered |
| Storage Life | 12 months |
| Maximum Grain Size | 0 - 5 mm |
| Max Service Temperature | 1750 |
| Form | Powder |
| Ferric Oxide | 0.25% |
| Alumina Content | 50 to 90 % |
| Brand | Caldry, Rv Refractory, Mahakosal |
Dense Castables (Whytheat A, K,C)
High purity dense castables are refractory castables suitable for high temperature applications, all of which contain high purity refractory cement CAL-AL-75 as the refractory binder. The impurity levels of all these castables are very low. These castables are available in various grades. Each grade of castables is suitable for a specific range of operational conditions.
Yes! I am InterestedRequest A Callback
Firecrete Super Refractory Castables
Product Price: Rs 56 / KgGet Best Price
Minimum Order Quantity: 25 Kg
Product Brochure
Product Details:
| Grade | Technical Grade |
| Max Service Temp | 1400°C |
| Packaging Size | 25 kg |
| Packaging Type | Packet |
| Alumina Content | 40–50 % |
| Application Area | CFBC Boiler, Foundry, Boiler, Incinerator, Cement Kiln |
| Setting Type | Chemical Bond |
| Brand | Caldrys, Mahakosal,sharadha,rv |
| State | Powdered |
| Color | Grey |
| Usage/Application | Brick Lining |
These catables are useful for forming strong joints and is used extensively in building material, metallurgy and petrochemical industries. Product Type. FireCrete (Super) Nature of Bond. Hydraulic.
Yes! I am InterestedRequest A Callback
Firecrete Super Castable
Product Price: Rs 55 / KgGet Best Price
Product Brochure
Product Details:
| Packaging Size | 25 kg |
| Packaging Type | Bag |
| State | Powdered |
| Color | Grey |
| Usage/Application | For Boilers, Induction Furnace, Laddle, etc. |
| Form | Powder and Stone |
| Alumina Content | 70% |
| Product Type | Firecrete (Super) |
| Nature of Bond | Hydraulic |
| Installation | Vibration Casting |
| General Properties | |
| Max. Service Temperature | 1450° C |
| Maximum Grain Size | 5 mm |
| Water Required For Casting | 10-11% |
| Chemical Analysis % | Typical Value |
| Al2O3 | 70.20 |
| Fe2O3 | 5.10 |
| CaO | 5.45 |
| Physical Properties | |
| Bulk density | g / cc |
| After drying at 110°C/24 hrs | 2.55 |
| CCS, kg/cm2 after drying at 110°C/24hrs | 380 |
| After heating at 1100°C/3 hrs | 250 |
| After heating at 1400°C/3 hrs | 430 |
| % retained on max. size | 0.8 |
| Thermal Properties | |
| Refractoriness, Orton / °C | +31 /1683 |
| PLC% | |
| After heating at 1100°C/3 hrs | -0.12 |
| After heating at 1400°C/3 hrs | -0.7 |
| Packaging | 25 kg bags |
| Storage life | 9 months |
| Delivery state | dry |
Yes! I am InterestedRequest A Callback
Calderys Whytheat A
Product Price: Rs 152 / KgGet Best Price
Minimum Order Quantity: 25 Kg
Product Brochure
Product Details:
| Packaging Size | 25 kg |
| Grade | A |
| Packaging Type | Bag |
| Brand | Caldrys |
| Material | Refractory Cement |
| State | Crystal, Powdered |
| Color | Grey |
| Bulk Density (g/cm Cube) | 2.9 g/cm |
| Temperature (deg. Celsius) | 1750 deg C |
| Usage/Application | Refractory castable |
| Grain Size (mm) | 0 to 5mm |
| Country of Origin | Made in India |
The Whytheat-A also finds its usage in
- The iron and steel industry for lining blast furnaces and for skew backs, ports and roof lining of arc-melting furnaces
- The non-ferrous metal industry to line reverberatory furnaces where high purity aluminium is produced
- The reactors of refineries as well as in fertilizer plants where castables with a high degree of resistance to carbon monoxide, hydrogen and ammonia are desired
- It is also used for the lining of preheaters/converters and on all transfer lines
Yes! I am InterestedRequest A Callback
Whytheat K Refractory Castable
Product Price: Rs 85 / KgGet Best Price
Product Brochure
Product Details:
| Grade | Technical Grade |
| Max Service Temp | 1600°C |
| Packaging Size | 25 kg |
| Packaging Type | Packet |
| Application Area | Foundry |
| Setting Type | Heat Setting |
| Alumina Content | 60% |
| State | Powdered |
| Color | Grey |
| Form | Dry Powder |
| Brand | Calderys |
| Usage/Application | Used For Service Temperature of 1600 degC |
| Bulk Density | 1.5–2.0 g/cm³ |
| Shelf Life | 9 months |
| Country of Origin | India |
Whytheat-K can be used in
- Blast furnaces
- Foundries
- Boiler industry stoker arches
- Locations with reducing atmospheres
- Construction of soak pit covers, forge furnaces, tunnel kilns, heat treatment furnace car tops as well as electro-phosphorus furnaces
Yes! I am InterestedRequest A Callback
Shrinkkomp Grouting Cement
Product Price: Rs 40 / KgGet Best Price
Product Brochure
Product Details:
| Packaging Size | 25 |
| Usage/Application | Grout for Foundation,machinery Grouting Applications |
| Type | bag |
| Color | grey |
| Grade | pourable |
| Grout Purpose | non shrink |
Yes! I am InterestedRequest A Callback
Calderys Shrinkkomp 30
Product Price: Rs 38 / KgGet Best Price
Product Brochure
Product Details:
| Packaging Size | 25 kg |
| Packaging Type | Bag |
| Usage/Application | Boulting |
| Brand | Fosroc, Bostik, Sika, Basf, Caldrys, Endura, Conpac |
| Application | Grouting of base plates of turbines, compressors, boiler feed pumps etc. |
| Form | Powder |
| Usage | Bolting, Rebar Fixing, Grouting |
| Grade Standard | Contruction |
| Material | Non Shrink Grout |
| Type | Powder |
| Work Area | Dry |
INTRODUCTION
Shrinkkomp is Non-Shrink, Free-Flowing, High Compressive strength, Self – Levelling, Non - Metallic, Oil & Water Resistant, Chloride - free, Easy to use, Pre-mixed cementitious grout for foundation grouting applications.
REASONS FOR USING GROUTS
Concrete made by using Ordinary Portland Cement will shrink on drying and therefore do not provide a firm grip to anchoring devices. This result in vibration in the equipment anchored to the concrete foundation leading to failure of the machine parts as well as the concrete foundations. Shrinkkomp Grouts are based on the Expansive hydraulic Setting Binders which impart controlled expansion that ensures the permanent bond between the Machine and the foundation.
SHRINKKOMP grouts are ideally suited for all types of Static and Dynamic Loads. Shrinkkomp Grouts develop very high compressive strength and unlike metallic grouts do not generate any gases leading to the failure of the bond with the surface in contact. Consistency in performance of Shrinkkomp grout is assured, as only recommended quantity of water is required to be added to the designed premix composition. The Flowable and Self-levelling properties ensure complete filling voids and perfect bearing making it ideal for applications viz,
Anchoring of machine base plates and bridge bearings.
Permanent anchoring of bolts.
Providing structural strength to the machine base and column foundation.
APPLICATIONS
SHRINKKOMP grouts are ideally suited for foundation grouting applications of structure steel stanchions, cranes, rails, anchors, bolts, base plates, bridge bearings, pumps, motors, compressors, generators, mills, turbines and many more equipment foundations.
Some of the key areas of application of SHRINKKOMP are:
Foundations Grouting
Dams
Soil Stabilization
Rocks (Strengthening of Underground Structure and Seepage check)
Repairs of structure (Micro concreting)
It is being used by all the leading industries / customers like Isgec John Thompson, GDCL, L & T, HOLTEC, BHEL, TISCO, NFL, Konkan Railways, Metro Rail Projects for Kolkata, JSPL, Bhushan Power & Steel, Ispat, SMC, Viraj Steel etc. and other various other important projects
VARIANTS AND THEIR APPLICATION
Shrinkkomp 10: Plastic
Shrinkkomp 20: Free flow (for grouting of medium size machine foundation; Static Loads)
Shrinkkomp -30: Free flow (for grouting of heavy machine foundation like Turbines, DG Sets etc, Heavy Vibrating machine foundation ; Dynamic load)
Shrinkkomp -40: Free flow (For early Commissioning of Projects within 3 days)
Yes! I am InterestedRequest A Callback
Castable Refractory Cement
Product Price: Rs 60 / BagGet Best Price
Minimum Order Quantity: 25 Bag
Product Brochure
Product Details:
| Refractoriness | 1400°C |
| Grade | Technical Grade |
| Packaging Size | 25 Kg |
| Alumina Content | 60% |
| Packaging Type | Packet |
| Packing Size | 25 kg |
| Usage | Incinerator, Furnace, Kiln, Boiler, Ladle Lining, Foundry |
| Installation Method | Castable |
| State | Powdered |
| Color | Grey |
| Brand | Calderys |
| Usage/Application | For Furnace |
Yes! I am InterestedRequest A Callback
Accoset 50 Refractory Cement
Product Price: Rs 1,250 / BagGet Best Price
Minimum Order Quantity: 1 Bag
Product Brochure
Product Details:
| Refractoriness | 1400°C |
| Grade | White |
| Alumina Content | 40–50 % |
| Packaging Size | 25 kg |
| Packing Size | 25 kg |
| Form | Powder |
| Usage | Furnace |
| Installation Method | Castable |
| Brand | Caldrys |
| Features | Used For Laying Refractory Or Fire Bricks |
| Shelf Life | 9 months |
| Packaging Type | PP Bag |
| Best Before | 9 months |
Features:
- Ready to use
- High bond strength
- Free from impurities
- Resistant to heat
Yes! I am InterestedRequest A Callback